Pioneer SA-6200 Stereo Integrated Amplifier
1 in stock
- Additional information
Stereo Integrated Amplifier
The SA-6200 is Pioneer’s medium powered, versatile stereo integrated amplifier.
It features an equaliser amplifier section with extra wide dynamic range signal acceptability, extended frequency response and wide power bandwidth with low distortion.
It handles up to 2 pairs of speaker systems, 2 turntables, 2 tape decks (for easy tape to tape dubbing), as well as 2 auxiliary sound sources and a microphone. Pre and power amplifier sections may be separated and used independently.
Power output: 15 watts per channel into 8Ω (stereo)
Frequency response: 15Hz to 80kHz
Total harmonic distortion: 0.5%
Damping factor: 30
Input sensitivity: 7.5mV (mic), 2.5mV (MM), 150mV (line)
Signal to noise ratio: 90dB (line)
Dimensions: 415 x 132 x 328mm
Serial No. TJ1900797
Description of work
The following tasks and parts have either been repaired or replaced:
All capacitors replaced with premium Nichicon FG range
Several resistors replaced
All PCB boards cleaned, checked and re-soldered
Washed and treated all potentiometers with De-Oxit
New speaker Gold Binding Posts
Treated all RCA’s with De-Oxit
Treated all contacts points with De-Oxit
Washed and cleaned chassis
Cleaned and polished all alloy parts, fascia and knobs
Calibrated all adjustable measurements
New 240 volt AC power lead
Tested in excess of 8 hours
Warranty: 8 months
RV HIFI Says:
Pioneer SA-6200 Stereo Integrated Amplifier, all new HI-END Nichicon Fine Gold electrolytic capacitors fitted, calibrated to specifications. New quality gold speaker binding posts installed. Sound quality is dynamic and full of life. This classic amplifier is getting hard to find these days and this is a fine example of Pioneer’s quality from 1974.
RV HIFI is passionate about Vintage HIFI, so we believe in doing the job right!
|Dimensions||52 x 46 x 24 cm|