AU101-1aAU101-1a
AU101-1aAU101-1a
AU101-2aAU101-2a
AU101-3aAU101-3a
AU101-4aAU101-4a
AU101-5aAU101-5a

Sansui AU101 Amplifier

SKU: SANAU101. Category: . Tags: , , , , .
  • Description
  • Additional Information
  • Reviews (0)

Product Description

Sansui

AU-101

SOLD

Description

Stereo Integrated Amplifier

Technical Specifications

Pre Amplifier
Inputs: Phono MM; Tuner; Tape; AUX; Monitor; Mic
Inp. Sensitivity High Level: 200 mV
Inp. Impedance High Level: 50 kΩ
Signal/Noise High Level: >85 db
Inp. Sensitivity Phono MM: 2 mV
Inp. Impedance Phono MM: 50 kΩ
Frequency Response Phono MM: RIAA
Signal/Noise Phono MM: >75 db
Outputs: REC OUT (RCA)
Output Voltage Rec Out: 180 mV
   
Tone Controls: Bass; Treble
Frequencies: Bass: ±13 dB/ 50 Hz; Treble: +10 dB/ 10 kHz
Loudness: yes
   
Power Amplifier
Speaker Outputs: 1 Speaker (4-16 Ω); Phones
Continuous power 8Ω: 15 + 15 Watts
Dynamic Power 8Ω: 22 + 22 Watts
Frequency Response: 20-60,000 (± 2 dB) HZ
Harmonic Distortion: 0.2 % at rated output
   
Dimensions 407w x 115h x 278d mm
Weight 5.9 Kg

Manufactured In Japan

RV HIFI Product Specific Report:

(our report on the specific product you are looking at and what work we have done to restore it)

[tabs]
[tab title=”General Condition”]

Here we have is this fully resorted classic 1970’s Sansui AU-101 Integrated Amplifier, condition of this unit is superb, we also topped it off by upgrading the components to high spec types.
Just look at the images and you will see how amazing this unit is. It has gone through our testing procedures and a major service, the following parts have been changed and tasks completed:
* New Mains AC power lead
* New genuine ON globe
* New set of fuses
* New Gold RCA sockets
* New Gold Speaker Binding posts
* New high quality Gold feet
* All electronic measurements and aligments followed
* All capacitors have been replaced with Hi Spec Audio types
* All suspect components replaced
* Deoxit all potentiometers
* Deoxit all RCA sockets
* Deoxit all speaker binding posts
* Washed and re-soldered all joins on all circuit boards
* Cleaned and polished chassis and facia
* Passed 20+ hour listening test

 

[/tab]

[tab title=”Sound”]

This Classic 1970’s gem really makes you think of how simple technology was way back then, the AU-101 consists of only 16 transistors and 4 diodes… not much to it! The sound is full of life, it has clarity and depth, not bad for only 15 watts per channel! [/tab]

[/tabs]

Additional Information

Weight 15.43 kg

Reviews

There are no reviews yet.


Be the first to review “Sansui AU101 Amplifier”